The Display menu contains commands for changing the display.

Allows the user to select whether a Power vs. Speed; Resistance vs. Speed or Resistance Coefficient vs. Speed graph is shown in the Results Graph window.

Note that in the case of the Resistance Coefficient vs. Speed graph, the y-axis is multiplied by a factor of 1000.

The contours command lets you select which contours are displayed in the design views.

The SB Mesh command in the Display menu display the hull surface mesh used for the slender body method. The mesh parameters may be modified with the SB Analysis Geometry command in the Analysis menu. See the Wave Pattern Display on page 33 for more information.

Displays a rectangular wire-frame, grid connecting the points at which the wave pattern elevation has been calculated

Displays isometric wave elevation contours for the computed free surface. In rendered mode a false-colour rendering is used.

In rendered mode, selecting Wave Solid Render will shade the rendered free surface. For printing, a better result is often achieved just with the wave grid displayed.

This function is only available in the Perspective window with rendering switched on.

Displays a rendered view of the model in the Perspective window (only if a Maxsurf model has been loaded). If the free surface has been calculated, it will also be rendered.

Rendering is only available in the Perspective window.