In the specified condition each of the three degrees of freedom, for which the hydrostatic properties of the model are to be calculated, can be set.

Specified Condition Requirements

§   Specified Conditions Input Dialog

If fixed trim is specified, you may enter the trim or specify the forward and aft drafts (these are at the perpendiculars as specified in the Frame of Reference dialog).

Specified Conditions Options

§   Fluid Densities

§   Wave form

§   Hog and sag

§   Grounding

§   Damage

§   Tank and Compartment definition (in case of damage)

The output for the specified condition consists of a curve of cross sectional areas and hydrostatics of the vessel in the specified condition.

For more detailed information please see Specified Conditions on page 73.