The menu items for the tables in the Data window appear in the Window menu.

Stringer names can be edited in the Stringer table in the Data window.

Girths are displayed in the table of stringer points.

Upstands are sorted by frame and girth in the Upstand table.

Upstand girth locations and girth spacings are displayed in the Upstand table.

Frame names, positions and limits can be edited in the Frame table in the Data window.

Frames may be selected by highlighting the corresponding rows in the Frames table. You may then recalculate or delete these selected frames.

Deck names, positions(heights) and limits can be edited in the Deck table in the Data window.

Plate names and properties can be edited in the Plate table in the Data window.

Plates may be selected by highlighting the corresponding rows in the Plates table. You may then recalculate or delete these selected plates.

The diagonal dimensions of plates are displayed in the Plate Dimensions table.

Heights and edge distances for all the pins in the jig can be viewed in this table. The pin jig information is displayed for the plate currently being viewed in the Part window.

The Parts provides weight, area, CG and perimeter information of the calculated parts as well as a summary total for the design.